v2.tiantianxinye.365care/public/plugins/gojs/extensionsTS/DimensioningLink.ts

/*
*  Copyright (C) 1998-2019 by Northwoods Software Corporation. All Rights Reserved.
*/

import * as go from '../release/go';

/**
 * A custom routed {@link Link} for showing the distances between a point on one node and a point on another node.
 *
 * Note that because this is a Link, the points being measured must be on {@link Node}s, not simple {@link Part}s.
 * The exact point on each Node is determined by the {@link Link#fromSpot} and {@link Link#toSpot}.
 *
 * Several properties of the DimensioningLink customize the appearance of the dimensioning:
 * {@link #direction}, for orientation of the dimension line and which side it is on,
 * {@link #extension}, for how far the dimension line is from the measured points,
 * {@link #inset}, for leaving room for a text label, and
 * {@link #gap}, for distance that the extension line starts from the measured points.
 *
 * If you want to experiment with this extension, try the <a href="../../extensionsTS/Dimensioning.html">Dimensioning</a> sample.
 * @category Part Extension
 */
export class DimensioningLink extends go.Link {
  private _direction: number = 0;
  private _extension: number = 30;
  private _inset: number = 10;
  private _gap: number = 10;

  /**
   * Constructs a DimensioningLink and sets the following properties:
   *   - {@link #isLayoutPositioned} = false
   *   - {@link #isTreeLink} = false
   *   - {@link #routing} = {@link Link.Orthogonal}
   */
  constructor() {
    super();
    this.isLayoutPositioned = false;
    this.isTreeLink = false;
    this.routing = go.Link.Orthogonal;
  }

  /**
   * Copies properties to a cloned DimensioningLink.
   */
  public cloneProtected(copy: this): void {
    super.cloneProtected(copy);
    copy._direction = this._direction;
    copy._extension = this._extension;
    copy._inset = this._inset;
    copy._gap = this._gap;
  }

  /**
   * The general angle at which the measurement should be made.
   *
   * The default value is 0, meaning to go measure only along the X axis,
   * with the dimension line and label above the two nodes (at lower Y coordinates).
   * New values must be one of: 0, 90, 180, 270, or NaN.
   * The value NaN indicates that the measurement is point-to-point and not orthogonal.
   */
  get direction(): number { return this._direction; }
  set direction(val: number) {
    if (isNaN(val) || val === 0 || val === 90 || val === 180 || val === 270) {
      this._direction = val;
    } else {
      throw new Error('DimensioningLink: invalid new direction: ' + val);
    }
  }

  /**
   * The distance at which the dimension line should be from the points being measured.
   *
   * The default value is 30.
   * Larger values mean further away from the nodes.
   * The new value must be greater than or equal to zero.
   */
  get extension(): number { return this._extension; }
  set extension(val: number) { this._extension = val; }

  /**
   * The distance that the dimension line should be "indented" from the ends of the
   * extension lines that are orthogonal to the dimension line.
   *
   * The default value is 10.
   */
  get inset(): number { return this._inset; }
  set inset(val: number) {
    if (val >= 0) {
      this._inset = val;
    } else {
      throw new Error('DimensionLink: invalid new inset: ' + val);
    }
  }

  /**
   * The distance that the extension lines should come short of the measured points.
   *
   * The default value is 10.
   */
  get gap(): number { return this._gap; }
  set gap(val: number) {
    if (val >= 0) {
      this._gap = val;
    } else {
      throw new Error('DimensionLink: invalid new gap: ' + val);
    }
  }

  /**
   * Constructs the link's route by modifying {@link #points}.
   * @return {boolean} true if it computed a route of points
   */
  public computePoints(): boolean {
    const fromnode = this.fromNode;
    if (!fromnode) return false;
    const fromport = this.fromPort;
    const fromspot = this.computeSpot(true);
    const tonode = this.toNode;
    if (!tonode) return false;
    const toport = this.toPort;
    const tospot = this.computeSpot(false);
    const frompoint = this.getLinkPoint(fromnode, fromport, fromspot, true, true, tonode, toport);
    if (!frompoint.isReal()) return false;
    const topoint = this.getLinkPoint(tonode, toport, tospot, false, true, fromnode, fromport);
    if (!topoint.isReal()) return false;

    this.clearPoints();

    let ang = this.direction;
    if (isNaN(ang)) {
      ang = frompoint.directionPoint(topoint);
      const p = new go.Point(this.extension, 0);
      p.rotate(ang + 90);
      const q = new go.Point(this.extension - this.inset, 0);
      q.rotate(ang + 90);
      const g = new go.Point(this.gap, 0);
      g.rotate(ang + 90);
      this.addPointAt(frompoint.x + g.x, frompoint.y + g.y);
      this.addPointAt(frompoint.x + p.x, frompoint.y + p.y);
      this.addPointAt(frompoint.x + q.x, frompoint.y + q.y);
      this.addPointAt(topoint.x + q.x, topoint.y + q.y);
      this.addPointAt(topoint.x + p.x, topoint.y + p.y);
      this.addPointAt(topoint.x + g.x, topoint.y + g.y);
    } else {
      const dist = this.extension;
      let r = 0.0;
      let s = 0.0;
      let t0 = 0.0;
      let t1 = 0.0;
      if (ang === 0 || ang === 180) {
        if (ang === 0) {
          r = Math.min(frompoint.y, topoint.y) - this.extension;
          s = r + this.inset;
          t0 = frompoint.y - this.gap;
          t1 = topoint.y - this.gap;
        } else {
          r = Math.max(frompoint.y, topoint.y) + this.extension;
          s = r - this.inset;
          t0 = frompoint.y + this.gap;
          t1 = topoint.y + this.gap;
        }
        this.addPointAt(frompoint.x, t0);
        this.addPointAt(frompoint.x + 0.01, r);
        this.addPointAt(frompoint.x, s);
        this.addPointAt(topoint.x, s);
        this.addPointAt(topoint.x - 0.01, r);
        this.addPointAt(topoint.x, t1);
      } else if (ang === 90 || ang === 270) {
        if (ang === 90) {
          r = Math.max(frompoint.x, topoint.x) + this.extension;
          s = r - this.inset;
          t0 = frompoint.x + this.gap;
          t1 = topoint.x + this.gap;
        } else {
          r = Math.min(frompoint.x, topoint.x) - this.extension;
          s = r + this.inset;
          t0 = frompoint.x - this.gap;
          t1 = topoint.x - this.gap;
        }
        this.addPointAt(t0, frompoint.y);
        this.addPointAt(r, frompoint.y + 0.01);
        this.addPointAt(s, frompoint.y);
        this.addPointAt(s, topoint.y);
        this.addPointAt(r, topoint.y - 0.01);
        this.addPointAt(t1, topoint.y);
      }
    }

    this.updateTargetBindings();
    return true;
  }
}